- Features, Performance, Value For the Everyday LMR User - 128 memory channels (Max.) separated into 8 memory zones - 4 watts front mounted speaker - 6 function programmable buttons - MIL standard 810F grade rugged construction - Built-in 2-Tone, 5-Tone, CTCSS and DTCS - MDC 1200 compatible - PTT ID (TX/RX) - Radio check (RX) - Radio stun (RX) - Radio revive (RX) - Emergency TX/RX (No ACK) - 5 alias table (Max.) - Up to ten 2-Tone and eight 5-Tone codes
Can be decoded on a channel. When a matched tone is received, the following items are programmable for each code. - Beep sound - Answer back - Scan - Bell icon - Radio stun/kill/revive
Radio kill, stun and revive The radio kill/stun functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. When the stun command is received, all functions will be temporary locked out until the revive command is received or the unlock password is entered.
Lone worker function When the radio is not operated for a preset period, the radio sounds a beep and requires you to push any button. If the radio is still not operated for a specified wait period, an emergency signal automatically transmits and informs co-workers that something may have happened to the individual worker.
Dependent scan In the mode dependent setting, the scanning setting is dependent on the operating channel. When you change the operating channel, the scanning list automatically changes to the list set for that channel. It is convenient when you move to a different operating area and change operating channel, you don’t have to change the scanning setting.
Tx channel setting and Talk back function The Tx channel setting allows you to program a transmission channel while scanning. Start channel, last detected channel, priority and preprogrammed channel are selectable. Prior to the Tx channel setting, the talk back function allows you to talk on the last detected channel, while scanning resumes after a preset time. The user can easily make a quick response with this function.
Wide frequency coverage IC-F5023/H 136– 174MHz IC-F6023/H 400–470MHz
Optional internal units UT-109R/UT-110R Voice scarmbler UT-108R/ DTMF Decoder unit
External memory channel control with optional ACC cable With the optional OPC-1939 D-SUB 15- pin ACC cable, the IC-F5023 series can be programmed to control an operating channel from an external device (up to 16 preprogrammed channels). The ACC connector also provides an ignition sensing function, external PTT, PC command, horn honk, audio output and modulated signal input depending on programming.
Other features - Wide and narrow channel spacing (25/ 12.5kHz) is programmable per channel - ±2.5ppm frequency stability - Microphone hanger action programmable - Optional DTMF microphone (HM-152T) - 8 DTMF autodial memories - BIIS 1200 PTT ID transmission - Power-on password function - Nuisance delete function - Time-out-timer, Lock-out penalty timer and more
_RS04105.jpg)
